An electric car is simpler than a petrol car. It has far fewer moving parts, no engine to warm up and no gearbox to shift. Here is what happens between the charging cable and the wheels.
The main parts
1. The battery
The large battery under the floor stores energy, measured in kilowatt-hours (kWh). A typical EV has 50–80 kWh, enough for roughly 300–500 km depending on the car, the speed and the weather. It is made of hundreds or thousands of lithium-ion cells. Most use one of two chemistries: NMC, which stores more energy per kilogram, or LFP (lithium iron phosphate), which lasts more charge cycles and is used by BYD and in many standard-range Teslas.
2. The battery management system
A computer watches every cell: its temperature, voltage and charge level. It keeps the battery in a safe range, heats or cools it, and controls how fast it can charge.
3. The inverter
The battery stores direct current (DC). Most EV motors run on alternating current (AC). The inverter converts one to the other and controls how much power goes to the motor, which is how the accelerator pedal works.
4. The electric motor
The motor turns electricity into motion. It delivers full torque from standstill, which is why EVs feel so quick when pulling away. Many cars have one motor; all-wheel-drive versions have two, one on each axle.
5. A single-speed gearbox
An electric motor works efficiently across a very wide range of speeds, so an EV usually needs just one gear. There is no clutch and nothing to shift.
6. The onboard charger
When you charge at home or at an AC charging point, the electricity from the grid is AC. The onboard charger inside the car converts it to DC for the battery. Its size decides how fast the car can charge on AC: typically 7 kW or 11 kW, sometimes 22 kW. That is why a bigger home charger does not always charge faster.
7. The 12 V battery
Like a petrol car, an EV has a small 12 V battery for the lights, locks, screens and computers.
What happens when you drive
- You press the accelerator.
- The inverter takes energy from the battery and sends it to the motor.
- The motor turns the wheels through the single gear.
- When you lift off or brake, the motor works as a generator and sends energy back to the battery. See regenerative braking explained.
Two ways to charge
- AC charging at home, at work or at a public AC point: the car's onboard charger does the conversion. Usually 3.7–11 kW; ideal overnight.
- DC fast charging at motorway stations: the charging station converts the electricity itself and feeds the battery directly, at 50–350 kW. Used on longer trips. See what is a fast charger?
Heating and cooling
There is no engine waste heat to warm the cabin, so EVs use an electric heater or, more efficiently, a heat pump. This is why range drops in winter. Preheating the car while it is still plugged in uses grid electricity instead of the battery.
Why EVs are so efficient
A petrol engine turns only a small part of the fuel's energy into motion; most is lost as heat. An electric drivetrain turns most of the battery's energy into motion and recovers some of it when braking. That is why an EV uses around 15–20 kWh per 100 km, the energy equivalent of less than two litres of petrol.
Next: Electric vs petrol and diesel: what is really different?